Installation guide

1. Insert one end of the power cable provided in the accessory kit into the power source socket (with

overload and leakage protection), and the other end to the power socket in the back panel of the

switch.

2. Check the power status indicator in the front panel of the switch. The corresponding power

indicator should light. SS3GR50i/26i switch is self-adjustable for the input voltage. As soon as the

input voltage is in the range printed on the switch surface, the switch can operate correctly.

3. When the switch is powered on, it executes self-test procedure and startups.

Caution

The input voltage must be within the required range, otherwise the switch can be damaged or

malfunction. Do not open the switch shell without permission. It can cause physical injury.

2-11