System information

Publication date: Feb., 2012
Revision A1
91
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
port-desc: Port description
sys-capa: System capability
sys-desc: System description
sys-name: System name
disable Disable TLV
enable Enable TLV
EXAMPLE:
reinit: ThecommandletsyouconfigureLLDPreinitdelay.
Syntax:
reinit <1-10>
Parameter :
<1-10>: LLDP reinit delay
EXAMPLE:
show: ThecommandshowLLDPinformation.
Syntax:
show config/ info/ statistics
Parameter :
config: Show LLDP configuration
info: Show LLDP neighbor device information
statistics: Show LLDP statistics
Switch(lldp)# reinit 10
Switch(lldp)# show config
Interval : 30
Hold : 4
Tx Delay : 2
Reinit Delay: 10
Switch(lldp)# option-tlv 1 mgmt-addr disable
Switch(lldp)# option-tlv 1 port-desc disable
Switch(lldp)# option-tlv 1 sys-capa disable
Switch(lldp)# option-tlv 1 sys-desc disable
Switch(lldp)# option-tlv 1 sys-name disable
Switch(lldp)# show config
Interval : 30
Hold : 4
Tx Delay : 2
Reinit Delay: 2
Port System System System Management CDP
Port Mode Description Name Description Capability Address awareness
---- -------- ----------- -------- ----------- ----------- ---------- ---------
1 Disabled Disabled Disabled Disabled Disabled Disabled Disabled
2 Disabled Enabled Enabled Enabled Enabled Enabled Disabled
3 Disabled Enabled Enabled Enabled Enabled Enabled Disabled