System information

Publication date: Feb., 2012
Revision A1
90
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
mode: ThecommandletsyouconfiguretheLLDPmode.
Syntax:
mode <port-list> disable/ enable
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5
disable: The switch will not send out LLDP information, and will drop
LLDP information received from neighbours
enable: The switch will send out LLDP information, and will analyze
LLDP information received from neighbours
EXAMPLE:

option‐tiv: ThecommandletsyouconfigureLLDPOptionalTLVs.
Syntax:
option-tlv <port-list> mgmt-addr/ port-desc/ sys-capa/ sys-desc/
sys-name disable/ enable
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5
mgmt-addr: Management IP address
Switch(lldp)# mode 1 enable
Switch(lldp)# show config
Interval : 30
Hold : 4
Tx Delay : 2
Reinit Delay: 2
Port System System System Management CDP
Port Mode Description Name Description Capability Address awareness
---- -------- ----------- -------- ----------- ----------- ---------- ---------
1 Enabled Enabled Enabled Enabled Enabled Enabled Disabled
2 Disabled Enabled Enabled Enabled Enabled Enabled Disabled
3 Disabled Enabled Enabled Enabled Enabled Enabled Disabled
Switch(lldp)# interval 40
Switch(lldp)# show config
Interval : 40
Hold : 4
Tx Delay : 2
Reinit Delay: 2
Port System System System Management CDP
Port Mode Description Name Description Capability Address awareness
---- -------- ----------- -------- ----------- ----------- ---------- ---------
1 Disabled Enabled Enabled Enabled Enabled Enabled Disabled
2 Disabled Enabled Enabled Enabled Enabled Enabled Disabled
3 Disabled Enabled Enabled Enabled Enabled Enabled Disabled