System information

Publication date: Feb., 2012
Revision A1
- 86 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
show: ThiscommandshowLACPinformation.
Syntax:
show config/ statistics/ status
Parameter :
config: Show LACP configuration
statistics: Show LACP statistics
status: Show LACP status
EXAMPLE:
Switch(lacp)# show config
Port Mode Key Role
---- -------- ----- ------
1 Disabled Auto Passive
2 Disabled Auto Active
Switch(lacp)# show statistics
Port Rx Frames Tx Frames Rx Unknown Rx Illegal
---- ---------- ---------- ---------- ----------
1 0 0 0 0
2 0 0 0 0
3 0 0 0 0
witch(lacp)# show status
Port Mode Key Aggr ID Partner System ID Partner Port
---- -------- ----- ------- ----------------- ------------
1 Disabled - - - -
2 Disabled - - - -
3 Disabled - - - -
Switch(lacp)# role 1 passive
Switch(lacp)# show config
Port Mode Key Role
---- -------- ----- ------
1 Disabled Auto Passive
2 Disabled Auto Active
3 Disabled Auto Active