System information

Publication date: Feb., 2012
Revision A1
- 69 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
fast‐leave: Thecommandletsyou toconfigure fast‐leaveper‐port
ontheswitch

Syntax:
fast-leave <port-list> disable/ enable
Parameter :
<port-list> The switch physical port, available value is from 1 to 28
format: 1,3-5.
disable: To disable the port fast-leave function.
enable: To enable the port fast-leave function
NOTE: When you enable IGMP fast-leave processing, the
switch immediately removes a port when it detects an IGMP
version 2 leave message on that port.
EXAMPLE:
filtering: The command lets you to configure the filtering and
theIPMulticastGroupthatwillbefiltered
Syntax:
filtering <port-list> <ipmc-address>
Parameter :
<port-list> The switch physical port, available value is from 1 to 28
format: 1,3-5.
ipmc-address: Type which ipmc-address to delete IGMP filtering
group. Available range from 224.0.0.0 to 239.255.255.255
EXAMPLE:
NOTE: If you type illegal ipmc-address, then switch won’t
allow you to filter it. And screen will display e.g. Invalid
argument "223.224.223.224"
flooding: Thecommandletsyoutoconfigurethefloodingmode
ontheswitch
Syntax:
flooding enable/ disable
Parameter :
disable: To disable the flooding function.
Switch(igmp)# filtering 5 224.0.0.1
Switch(igmp)#
Switch(igmp)# fast-leave 1 disable
Switch(igmp)#