System information

Publication date: Feb., 2012
Revision A1
- 68 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
snooping
Set IGMP Snooping Mode
ssm-range
Set IGMP SSM Range
state
Enable/Disable per-VLAN IGMP Snooping Mode
throttling
Set per-port Throttling
uri
Set per-VLAN Unsolicited Report Interval
compatibility: The command lets you to configure the compatibility
parametersontheswitch
Syntax:
compatibility <vlan-list> Forced-IGMPv1/ Forced-IGMPv2/
Forced-IGMPv3 /IGMP-Auto
Parameter :
<vlan-list> VLAN list, available value is from 1 to 4094 format: 1, 3-5.
Forced-IGMPv1 : Set IGMPv1 of IGMP operating on hosts and routers
Forced-IGMPv2 : Set IGMPv2 of IGMP operating on hosts and routers
Forced-IGMPv3 : Set IGMPv3 of IGMP operating on hosts and routers
IGMP-Auto: Set auto mode of IGMP operating on hosts and routers
EXAMPLE:
delete: The command lets you to delete the setting on the
switch
Syntax:
delete <port-list> <ipmc-address>
Parameter :
<port-list> The switch physical port, available value is from 1 to 28
format: 1,3-5.
ipmc-address: Type which ipmc-address to delete IGMP filtering
group. Available range from 224.0.0.0 to 239.255.255.255
EXAMPLE:
NOTE: If you type illegal ipmc-address, then switch won’t
allow you to delete it. And screen will display e.g. Invalid
argument "223.224.223.224"
Switch(igmp)# delete 3 224.0.0.2
Switch(igmp)#
Switch(igmp)# compatibility 1 IGMP-Auto
Switch(igmp)# show status 1
Querier Rx Tx Rx Rx Rx Rx
VID Status Query Query V1 Join V2 Join V3 Join V2 Leave
---- ------ ---------- ---------- ---------- ---------- ---------- ----------
Switch(igmp)#