System information

Publication date: Feb., 2012
Revision A1
- 60 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
join‐time: The command lets you set the GARP join  timer
configurationontheswitch

Syntax:
join-time <port-list> <time-value>
Parameter :
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<time-value> join time value, available value is from 200 to 400
seconds.
EXAMPLE:
NOTE: If you didn’t set the GARP environment already then
the switch will show “Set jointimer failed”.
leave‐all: Thecommand letsyou tosettheGARP leaveall timer
configurationsontheswitch
Syntax:
leave-all <port-list> <timer-value>
Parameter :
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<timer-value> leave all time value, available value is from 10000 to
100000 seconds.
EXAMPLE:
NOTE: If you didn’t set the GARP environment already then
the switch will show “Set leave all timer failed”.
leave‐time: The command lets you to set GARP leave timer
configurationontheswitch
Syntax:
leave-time <port-list> <timer-value>
Parameter :
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<timer-value> leave all time value, available value is from 10000 to
Switch(garp)# leave-all 3-5 10000
Error! Set leavealltimer failed
Switch(garp)#
Switch(garp)# join-time 3-5 200
Error! Set jointimer failed
Switch(garp)# applicant 3 non-participant
Switch(garp)#