System information

Publication date: Feb., 2012
Revision A1
- 56 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 16 FirmwareCommandsofCLI
firmware
This section describes how to upgrade Firmware. The Switch can be
enhanced with more value‐added functions by installing firmware
upgrades.
Table 15: firmware Commands
Command Function
show
Show information about active and alternate firmware
ima
g
es
swap
Activate the alternate firmware image
upgrade
Upgrade system firmware
show: The command lets you to display the active and
alternatefirmwareimageversioninformation

Syntax:
show <cr>
Parameter :
<cr> means it without any parameter needs to type.
EXAMPLE:
swap: Thecommandletsyouswaptheactivefirmwareimage
toalternatefirmwareimageorreversebetweenthem
Syntax:
swap <cr>
Parameter :
<cr> means it without any parameter needs to type.
EXAMPLE:
Switch(firmware)# show
Active Image
------------
Image : managed
Version : (standalone) v1.14
Date : 2011-12-21T10:41:33+08:00
Alternate Image
---------------
Image : managed.bk
Version : (standalone) v1.13
Date : 2011-12-08T11:37:00+08:00
Switch(firmware)#