System information
Publication date: Feb., 2012
Revision A1
- 49 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
<end> The parameter lets you to finish Easy Port setting and return.
<psec-action> The parameter lets you to configure port security
action for IP Camera.
both Send a SNMP trap and shutdown the port.
none Do nothing.
shutdown Shutdown the port.
trap Send a SNMP trap.
<psec-limit> The parameter lets you to configure port security
maximum for IP Camera.
<1-50> Max. number of MAC addresses.
<psec-mode> The parameter lets you to configure port security mode
for IP Camera.
disable Disable port security.
enable Enable port security.
<show> The parameter lets you to display Easy Port parameter.
<traffic-class> The parameter lets you to configure traffic class for IP
Camera.
<0-7> 0:Low, 7:High.
<vlan-mode> The parameter lets you to configure VLAN mode for IP
Camera.
access Untag all frames.
hybrid Tag all frames except VLAN ID same as PVID.
trunk Tag all frames.
EXAMPLE:
Switch(easyport/wifi-ap)# access-vlan 55
Switch(easyport/wifi-ap)# admin-edge disable
Switch(easyport/wifi-ap)# bpdu-guard disable
Switch(easyport/wifi-ap)# psec-action both
Switch(easyport/wifi-ap)# psec-limit 30
Switch(easyport/wifi-ap)# psec-mode enable
Switch(easyport/wifi-ap)# traffic-class 4
Switch(easyport/wifi-ap)# vlan-mode hybrid
Switch(easyport/wifi-ap)# show
Role : WIFI-AP
Access VLAN : 55
VLAN Mode : Hybrid
Traffic Class : 4
Port Security Mode : Enabled
Port Security Action : Trap & Shutdown
Port Security Limit : 30
STP Admin Edge : Disabled
STP BPDU Guard : Disabled
Switch(easyport/wifi-ap)#