System information

Publication date: Feb., 2012
Revision A1
- 48 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
wifi‐ap: The command lets you to configure WiFi‐AP easily on
theswitchthroughprofileandrule
Syntax:
wifi-ap <port-list> (1
st
level), below: 2
nd
level
<access-vlan> <1-4094>.
<admin-edge> disable/ enable.
<auto-logout> <10-3600>
<bpdu-guard> disable/ enable.
<end>
<psec-action> both/ none/ shutdown/ trap.
<psec-limit> <1-50>
<psec-mode> disable/ enable.
<show>
<traffic-class> <0-7>
<vlan-mode> access/ hybrid/ trunk.
Parameter :
<port-list> Port list, available value is from 1 to 10B format:1,3-5
(1
st
level), below are 2
nd
level parameter.
<access-vlan> The parameter lets you to configure access VLAN for IP
Camera.
<1-4094> Access VLAN ID, available value is from 1 to 4094.
<admin-edge> The parameter lets you to configure spanning tree
admin-edge for IP Camera.
disable Disable spanning tree admin edge.
enable Enable spanning tree admin edge.
<bpdu-guard> The parameter lets you to configure spanning tree
BPDU guard for IP Camera.
disable Disable spanning tree BPDU guard.
enable Enable spanning tree BPDU guard.
Switch(easyport/ip-phone)# vlan-mode access
Switch(easyport/ip-phone)# psec-action both
Switch(easyport/ip-phone)# save start
Switch(easyport/ip-phone)# show
Role : IP-Phone
Access VLAN : 20
VLAN Mode : Access
Voice VLAN : 20
Traffic Class : 7
Port Security Mode : Enabled
Port Security Action : Trap & Shutdown
Port Security Limit : 30
STP Admin Edge : Enabled
STP BPDU Guard : Enabled
Switch(easyport/ip-phone)#