System information
Publication date: Feb., 2012
Revision A1
- 45 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Camera.
<1-4094> Access VLAN ID, available value is from 1 to 4094.
<admin-edge> The parameter lets you to configure spanning tree
admin-edge for IP Camera.
disable Disable spanning tree admin edge.
enable Enable spanning tree admin edge.
<bpdu-guard> The parameter lets you to configure spanning tree
BPDU guard for IP Camera.
disable Disable spanning tree BPDU guard.
enable Enable spanning tree BPDU guard.
<end> The parameter lets you to finish Easy Port setting and return.
<psec-action> The parameter lets you to configure port security
action for IP Camera.
both Send a SNMP trap and shutdown the port.
none Do nothing.
shutdown Shutdown the port.
trap Send a SNMP trap.
<psec-limit> The parameter lets you to configure port security
maximum for IP Camera.
<1-50> Max. number of MAC addresses.
<psec-mode> The parameter lets you to configure port security mode
for IP Camera.
disable Disable port security.
enable Enable port security.
<show> The parameter lets you to display Easy Port parameter.
<traffic-class> The parameter lets you to configure traffic class for IP
Camera.
<0-7> 0:Low, 7:High.
<vlan-mode> The parameter lets you to configure VLAN mode for IP
Camera.
access Untag all frames.
hybrid Tag all frames except VLAN ID same as PVID.
trunk Tag all frames.
NOTE: The command configuration has level rule, you need
to set the port-list what you want to assign setting profile first,
and then enter to 2
nd
level to set every parameters.
EXAMPLE: