System information

Publication date: Feb., 2012
Revision A1
- 44 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 13 EasyportCommandsofCLI
Easyport
Easy Port provides a convenient way to save and share common
configurations.Youcanuseittoenablefeaturesandsettingsbasedonthe
location of a switch in the network and for mass configuration
deployments across the network. You could easy to implement included
VoiceIPphone,WirelessAccessPoint
andIPCamera…etc.Othersyoucan
leverageconfigurationtorunaconvergedvoice,video,anddatanetwork
considering quality of service (QoS), bandwidth, latency, and high
performance.
Table 12: Easyport Commands
Command Function
ip-cam
To set the IP-CAM Configuration on the switch
ip-phone
To set the IP-Phone Configuration on the switch
wifi-ap
To set the WIFI-AP Configuration on the switch.
ip‐cam: The command lets you to configure ip‐cam easily on
theswitchthroughprofileandrule.
Syntax:
ip-cam <port-list> (1
st
level), below: 2
nd
level
<access-vlan> <1-4094>.
<admin-edge> disable/ enable.
<auto-logout> <10-3600>
<bpdu-guard> disable/ enable.
<end>
<psec-action> both/ none/ shutdown/ trap.
<psec-limit> <1-50>
<psec-mode> disable/ enable.
<quit>
<restore> default/ user
<save> start/ user
<show>
<traffic-class> <0-7>
<vlan-mode> access/ hybrid/ trunk.
Parameter :
<port-list> Port list, available value is from 1 to 10B format:1,3-5
(1
st
level), below are 2
nd
level parameter.
<access-vlan> The parameter lets you to configure access VLAN for IP