System information

Publication date: Feb., 2012
Revision A1
- 31 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
EXAMPLE:
mode: ThecommandletsyouconfigureARPinspectionmode
Syntax:
delete <port-list> <1-4094> <ip-address> <mac-address>
Parameter :
<port-list>
Port list, available value is from switch physic port density,
format: 1,3-5
<1-4094> VLAN ID, available value is from 1 to 4094
<ip-address> IP address allowed for doing ARP request
<mac-address> MAC address, format 0a-1b-2c-3d-4e-5f
EXAMPLE:
port‐mode: ThecommandletsyouconfigureARPinspectionport
mode
Syntax:
Port-mode <port-list> disable/ enable
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5
disable Disable ARP inspection port mode
enable Enable ARP inspection port mode
EXAMPLE:
show: ThecommandletsyoudisplaytheARPinspection
configurationinformation.
Syntax:
show config/ status
Parameter :
config Show ARP inspection configuration
status Show ARP inspection static and dynamic entry
EXAMPLE:
Switch(arp-inspection)# port-mode 1 disable
Switch(arp-inspection)#
Switch(arp-inspection)# mode disable
Switch(arp-inspection)#
Switch(arp-inspection)# delet 1 5 192.168.1.2 0a-1b-2c-3d-4e-5f
Switch(arp-inspection)#