System information

Publication date: Feb., 2012
Revision A1
- 27 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 6 AggregationCommandsofCLI
Aggregation
TheAggregationisusedtoconfigurethesettingsofLinkAggregation.You
canbundlemorethanoneportwiththesamespeed,full duplexandthe
sameMACtobeasinglelogicalport,thusthelogicalportaggregatesthe
bandwidth of these ports. This means you can apply your current
Ethernetequipmentstobuildthebandwidthaggregation.Forexample,
if there are three Fast Ethernet ports ag gregated in a logical port, then
this logical port has bandwidth three times as high as a single Fast
Ethernetporthas.
Table 5: Aggregation Commands
Command
Function
delete
Delete command
group
Configure the link aggregation group
mode
Configure the link aggregation traffic distribution mode
Show
Show aggregation group information
delete:
Thiscommandletsyoudeletethelinkaggregation
entryonswitch.
Syntax:
delete <group>
Parameter :
<group> The link aggregation group what you want to delete.
EXAMPLE:
Switch(acl)# show port
Rate
Port Policy Action Limiter Port Copy Mirror Logging Shutdown Counter
---- ------ ------ -------- ------------ -------- -------- -------- ----------
1 1 Permit 1 Disabled Disabled Disabled Disabled 0
2 1 Permit Disabled Disabled Disabled Disabled Disabled 0
3 1 Permit Disabled Disabled Disabled Disabled Disabled 0
4 1 Permit Disabled Disabled Disabled Disabled Disabled 0
5 1 Permit Disabled Disabled Disabled Disabled Disabled 0
6 1 Permit Disabled Disabled Disabled Disabled Disabled 0
7 1 Permit Disabled Disabled Disabled Disabled Disabled 0
8 1 Permit Disabled Disabled Disabled Disabled Disabled 0
9A 1 Permit Disabled Disabled Disabled Disabled Disabled 0
10A 1 Permit Disabled Disabled Disabled Disabled Disabled 0
9B 1 Permit Disabled Disabled Disabled Disabled Disabled 0
10B 1 Permit Disabled Disabled Disabled Disabled Disabled 0
Rate Limiter Rate
------------ ------------
1 1 PPS
2 1 PPS
3 1 PPS
4 1 PPS
5 1 PPS
--More--, q to quit