System information

Publication date: Feb., 2012
Revision A1
- 24 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
permit : Permit forwarding
EXAMPLE:
delete: ThiscommandletsyoudeletetheACE(AccessControl
Entry)configurationontheswitch.
Syntax:
delete <1-256>.
Parameter :
<1-256> ACE ID must be exist
EXAMPLE:
logging: ThiscommandletsyouconfigureACLportdefault
loggingoperation.
Syntax:
logging <port-list> enable/disable
Parameter :
<port-list> : Port list, available value is from switch physic port
density, format: 1,3-5
disable : Frames received on the port are not logged
enable : Frames received on the port are stored in the system log
EXAMPLE:
Switch(acl)# logging 1 disable
Switch(acl)#
Switch(acl)# delete 1
Switch(acl)#
Switch(acl)# show acl-config
Number of ACEs: 0
Switch(acl)# action 1 permit
Switch(acl)#
Switch(acl)# show port
Rate
Port Policy Action Limiter Port Copy Mirror Logging Shutdown Counter
---- ------ ------ -------- ------------ -------- -------- -------- ----------
1 1 Deny Disabled Disabled Disabled Disabled Disabled 0
2 1 Permit Disabled Disabled Disabled Disabled Disabled 0
3 1 Permit Disabled Disabled Disabled Disabled Disabled 0
4 1 Permit Disabled Disabled Disabled Disabled Disabled 0
5 1 Permit Disabled Disabled Disabled Disabled Disabled 0
……………..
Rate Limiter Rate
------------ ------------
1 1 PPS
2 1 PPS
3 1 PPS
4 1 PPS