System information

Publication date: Feb., 2012
Revision A1
- 223 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 50 VLANCommandsofCLI
VLAN
To assign a specific VLAN for management purpose. The management
VL AN is used to establish an IP connection to the switch from a
workstationconnectedtoaportintheVLAN.Thisconnectionsupportsa
VSM,SNMP,andTelnetsession.Bydefault,theactivemanagementVLAN
isVL AN1.Onlyone
managementVLANcanbeactiveatatime.

Table 49: VLAN Commands
Command Function
delete
Delete VLAN group
egress-rule
Configure egress-rule of switch ports
forbidden
Configure forbidden VLAN group
frame-type
Configure frame type of switch ports
ingress-filtering
Configure ingress filtering of switch ports
port-type
Configure port type of switch ports
pvid
Configure port VLAN ID
show
Show VLAN information
tag-group
Configure tag-based VLAN group
tpid
Configure the TPID used for Custom S-ports. This is a
g
lobal settin
g
for all the Custom S-
p
orts
delete: ThecommandletsyouDeleteVLANgroup
Syntax:
delete forbidden/ group <1-4094>
Parameter :
forbidden: Delete VLAN forbidden group
group: Delete tag-based VLAN group
<1-4094>: VLAN ID, available value is from 1 to 4094
EXAMPLE:
egress‐rule: The commandletsyou Configureegre ss‐ruleof switch
ports
Syntax:
egress-rule <port-list> access
/
hybrid
/
trunk
Switch(vlan)# delete forbidden 1
Switch(vlan)# delete group 1