System information

Publication date: Feb., 2012
Revision A1
- 212 -
Chapter 47 SystemtimeCommandsofCLI
Time
This page configure the switch Time. Time configure is including Time
ConfigurationandNTPConfiguration
The switch provides manual and automatic way s to set the system time
via NTP. Manual setting is simple and you just input “Year ”, “Month”,
“Day”, “Hour”, “Minute” and “Second” within the valid value range
indicatedin
eachitem.
Table 46: Time Commands
Command Function
clock-source
Enable/Diable applicant administrative control
daylight
Set the GARP join timer configuration
delete
Set the GARP leave all timer configuration
manual
Set the GARP leave timer configuration
ntp
Configure NTP server
show
Show the GARP configuration
time-zone
Configure system time zone
clock‐source: Thecommandletsyouconfiguretheclocksource

Syntax:
clock-source local
/
ntp
Parameter :
local: Local settings
ntp: Use NTP to synchronize system clock
EXAMPLE:
daylight: The command lets you indicates the Daylight Savings
operation

Syntax:
daylight disable
Switch(time)# clock-source ntp
Switch(time)# show daylight
Clock Source : NTP Server
Local Time : 2011-01-01 07:19:44 (YYYY-MM-DD HH:MM:SS)
Time Zone Offset : 0 (min)
Daylight Savings : Disabled