System information

Publication date: Feb., 2012
Revision A1
- 206 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 45 SystemCommandsofCLI
System
Afteryoulogin,theswitchshowsyouthesysteminformation.Thispageis
default and tells you the basic information of the system, including
“ModelName”,“Syst emDescription”,“Contact”,“DeviceName”,“System
Up Time”, “BIOS Version” , “Firmware Version” , “Hardware‐Mechanical
Version” ,“SerialNumber”,“HostIPAddress”,“HostMacAddress”,“Device
Port”,
“RAMSize”,“FlashSize”and.Withthisinformation,youwillknow
thesoftwareversionused,MAC address,serialnumber,  howmanyports
goodandsoon.Thisishelpfulwhilemalfunctioning.
Table 44: System Commands
Command Function
contact
Configure system contact
location
Configure system location
name
Configure device name
show
Show system information
contact: ThecommandletsyouConfiguresystemcontact

Syntax:
contact <LINE>
Parameter :
<LINE>: Up to 255 characters describing system contact information
EXAMPLE: