System information

Publication date: Feb., 2012
Revision A1
- 204 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
mode: ThecommandletsyouConfiguresyslogmode
Syntax:
mode disable/ enable
Parameter :
disable: Disable syslog mode
enable: Enable syslog mode
EXAMPLE:
server: ThecommandletsyouConfiguresyslogserverIP
address
Syntax:
server <1-2> <ip-hostname>
Parameter :
<1-2>: Syslog Server No.
<ip-hostname>: Syslog server IP address or host name
EXAMPLE:
show: ThecommandletsyouShowsysloginformation
Syntax:
show config
show detail-log <log-id>
show log <0-7>
Parameter :
config: Show syslog configuration
detail-log: Show detailed syslog information
<log-id>: Log ID
log: Show syslog entry
<0-7> : Show syslog entry that match the level
EXAMPLE:
Switch(syslog)# server 2 192.168.6.1
Switch(syslog)# show config
Server Mode : Enabled
Server Address 1 :
Server Address 2 : 192.168.6.1
Syslog Level : Debug
Switch(syslog)# mode enable
Switch(syslog)# show config
Server Mode : Enabled
Server Address 1 :
Server Address 2 :
Syslog Level : Debug