System information

Publication date: Feb., 2012
Revision A1
- 196 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
p‐mode: ThecommandletsyouSettheSTPenablingforaport
Syntax:
p-mode aggregations/<port-list> disable/ enable
Parameter :
aggregations: available value is for aggregated port
<port-list>: available value is from switch physic port density, format:
1,3-5
disable: disable: Disable MSTP protocol
enable: enable :
Enable MSTP protoc
EXAMPLE:
p‐p2p: ThecommandletsyouSettheSTPpoint2pointport
Syntax:
p-p2p aggregations
/
<port-list> auto/ disable/ enable
Parameter :
aggregations: available value is for aggregated port
<port-list>: available value is from switch physic port density, format:
1,3-5
auto: auto : Automatic MSTP point2point detection
disable: disable: Disable MSTP point2point
enable: enable :
Enable MSTP point2point
EXAMPLE:
Switch(stp)# p-mode aggregations enable
Switch(stp)# show pconf
Port Mode AdminEdge AutoEdge restrRole restrTcn bpduGuard Point2point
---- -------- ------------------ ------------------ ---------------------
Aggr Enabled Disabled Enabled Disabled Disabled Enabled Enabled
Port Mode AdminEdge AutoEdge restrRole restrTcn bpduGuard Point2point
---- -------- ------------------ ------------------ ---------------------
1 Disabled Disabled Disabled Disabled Disabled Enabled Auto
2 Disabled Disabled Enabled Disabled Disabled Disabled Auto