System information

Publication date: Feb., 2012
Revision A1
- 193 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
p‐AutoEdge: The command lets you Set the STP autoEdge port
parameter
Syntax:
p-autoEdge aggregations/<port-list> disable/ enable
Parameter :
aggregations: available value is for aggregated port
<port-list>: available value is from switch physic port density, format:
1,3-5
disable: disable: Disable MSTP autoEdges
enable: enable : Enable MSTP autoEdge
EXAMPLE:
Switch(stp)# p-autoEdge aggregations enable
Switch(stp)# show pconf
Port Mode AdminEdge AutoEdge restrRole restrTcn bpduGuard Point2point
---- -------- ------------------ ------------------ ---------------------
Aggr Disabled Disabled Enabled Disabled Disabled Disabled Enabled
Port Mode AdminEdge AutoEdge restrRole restrTcn bpduGuard Point2point
---- -------- ------------------ ------------------ ---------------------
1 Disabled Disabled Enabled Disabled Disabled Disabled Auto
2 Disabled Disabled Enabled Disabled Disabled Disabled Auto
3 Disabled Disabled Enabled Disabled Disabled Disabled Auto
Switch(stp)# p-autoEdge 1 disable
Switch(stp)# show pconf
Port Mode AdminEdge AutoEdge restrRole restrTcn bpduGuard Point2point
---- -------- ------------------ ------------------ ---------------------
Aggr Disabled Disabled Enabled Disabled Disabled Disabled Enabled
Port Mode AdminEdge AutoEdge restrRole restrTcn bpduGuard Point2point
---- -------- ------------------ ------------------ ---------------------
1 Disabled Disabled Disabled Disabled Disabled Disabled Auto
2 Disabled Disabled Enabled Disabled Disabled Disabled Auto
3 Disabled Disabled Enabled Disabled Disabled Disabled Auto
Switch(stp)# msti-vlan add 1 4094
Switch(stp)# show msti-vlan
MSTI VLANs mapped to MSTI
---- --------------------
MSTI1 4094
MSTI2 No VLANs mapped
MSTI3 No VLANs mapped
MSTI4 No VLANs mapped
MSTI5 No VLANs mapped
MSTI6 No VLANs mapped
MSTI7 No VLANs mapped