System information

Publication date: Feb., 2012
Revision A1
- 192 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
migrate‐check: ThecommandletsyouSet theSTP mCheck (Migration
Check)variableforports
Syntax:
migrate-check <port-list>
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
EXAMPLE:
msti‐vlan: ThecommandletsyouMapVlanID(s)toanMSTI
Syntax:
msti-vlan add
/
del <0-7> <1-4094>
Parameter :
add: Add a VLAN to a MSTI
del: clear MSTP MSTI VLAN mapping configuration
<0-7>: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<1-4094>: available from 1 to 4094
EXAMPLE:
Switch(stp)# migrate
-
c
heck 1
Switch(stp)# bpduguard enable
Switch(stp)# show instance
STP Configuration
Protocol Version: Compatible (STP)
Max Age : 39
Forward Delay : 30
Tx Hold Count : 9
Max Hop Count : 38
BPDU Filtering : Enabled
BPDU Guard : Enabled
Error Recovery : 0 seconds
Error Recovery : Disabled