System information

Publication date: Feb., 2012
Revision A1
- 179 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Parameter :
<WORD>: group name: max 32 chars
any: Security Model
usm: Security Model
AuthNoPriv: Security Level. If security_model is not usm, the
security_level value must be NoAuthNoPriv
AuthPriv: Security Level. If security_model is not usm, the
security_level value must be NoAuthNoPriv
NoAuthNoPriv: Security Level. If security_model is not usm, the
security_level value must be NoAuthNoPriv
<WORD>: read_view_name: The scope for a
specified instance can read, None is reserved for
Empty.
<WORD>: write_view_name: The scope for a
specified instance can write,None is reserved for
Empty.
v1: Security Model
v2c: Security Model
AuthNoPriv: Security Level. If security_model is not usm, the
security_level value must be NoAuthNoPriv
EXAMPLE:
comminity: ThecommandletsyouconfigureSNMPcommunity
Syntax:
community <WORD> <WORD> <ip-address> <ip-mask>
Parameter :
<WORD>: community: max 32 chars<60-1400> Size of ICMP echo
packet
<WORD>: user name: max 32 chars
<ip-address>: SNMP access source ip
<ip-mask>: SNMP access source address mask
EXAMPLE:
Switch(snmp)# access g usm noAuthNoPriv v v
Switch(snmp)# show access
SNMPv3 Accesses Table:
Idx Group Name Model SecurityLevel Read View Name Write View Name
--- ---------------- ----- -------------- ---------------- ----------------
1 g usm NoAuth, NoPriv v v