System information

Publication date: Feb., 2012
Revision A1
- 178 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 41 SNMPCommandsofCLI
SNMP
Any Network Management System (NMS) running the Simple Network
Management Protocol (SNMP) can manage the Managed devices
equippedwith SNMP agent, provided that the ManagementInformation
Base(MIB) is installedcorrectly on the managed devices. The SNMP is a
protocolthatisusedtogovernthetransferofinformationbetweenSNMP

manager and agent and traverses the Object Identity (OID)  of the
managementInformationBase(MIB),describedintheformofSMIsyntax.
SNMP agent is running on the switch to response the request issued by
SNMPmanager.
Basically, it is passive except issuing the trap information. The switch
supports a
switch to turn on or off the SNMP agent. If you set the field
SNMP “Enable”,SNMP agent will be started up. AllsupportedMIBOIDs,
including RMON MIB, can be accessed via SNMP manager. If the field
SNMP is set “Disable”, SNMP agent will be de‐activated, the related
Community
Name,TrapHostIPAddress,TrapandallMIBcounterswillbe
ignored.

Table 40: SNMP Commands

Command Function
access
Configure SNMP access
community
Configure SNMP community
delete
Delete command
engine-id
Set SNMP Engine ID
getcommunity
Configure SNMP Get Community
group
Configure SNMP groups
mode
Enable/Disable SNMP mode
setcommunity
Configure SNMP Set Community
show
Show SNMP command
trap
Configure SNMP trap
user
Configure SNMP users
view
Configure SNMP views
access: ThecommandletsyouconfigureSNMPaccess
Syntax:
access any
/
usm AuthNoPriv
/
AuthPriv
/
NoAuthNoPriv <WORD>
<WORD>
access v1/ v2c AuthNoPriv <WORD> <WORD>