System information

Publication date: Feb., 2012
Revision A1
- 17 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 3 AccessCommandsofCLI
Access
This section shows you to configure access management table of the
Switch including HTTP/HTTPS, SNMP, and TELNET/SSH. You can manage
theSwitchoveranEthernetLAN,orovertheInternet..

Table2:AccessCommandsinCLI

Command Function
add
Add or modify access management entry
clear
Clear access management statistics
delete
Delete access management entry
mode
Configure the access management mode
show
Show access management information
add: Thecommandletsyouaddormodifyaccess
managemententry
Syntax:
add <1-16> <ipv4/ipv6> <ip-address> <ip-address>
<all> <snmp> <telnet> <web>
Parameter :
<1-16> To set the entry index
<ipv4> IPv4 format address
<ipv6> IPv6 format address
<ip-address> Start IP address
<ip-address> End IP address
<all> All interfaces what the switch physical ports
<snmp> To set the SNMP interface
<telnet> To set up the TELNET/SSH interface
<web> To set the HTTP/HTTPS interface
EXAMPLE: