System information

Publication date: Feb., 2012
Revision A1
- 166 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
pcp: Configure the default PCP. This value is used when port tag
remarking mode is set to 'default'
<0-7>: Priority Code Point
EXAMPLE:
wred: The command lets you configure Weighted Random
EarlyDetection
Syntax:
wred <queue-list> disable/ enable <0-100> <0-100> <0-100>
<0-100>
Parameter :
<queue-list>: Queue list, available value is from 0 to 5
disable: Disable
enable: Enable
<0-100>: Minimum threshold
<0-100>: Maximum Drop Probability for DP level 1
<0-100>: Maximum Drop Probability for DP level 2
<0-100>: Maximum Drop Probability for DP level 3
EXAMPLE:
Switch(qos)# wred 5 enable 10 20 30 40
Switch(qos)# show wred
Queue Mode Min. Threshold Max. DP 1 Max. DP 2 Max. DP 3
----- -------- -------------- --------- --------- ---------
0 Disabled 0 1 5 10
1 Disabled 0 1 5 10
2 Disabled 0 1 5 10
3 Disabled 0 1 5 10
4 Disabled 0 1 5 10
5 Enabled 10 20 30 40
Switch(qos)# tag-remarking dei 1 1
Switch(qos)# tag-remarking mode 2 mapped
Switch(qos)# tag-remarking pcp 3 7
Switch(qos)# show tag-remarking
Port Mode PCP DEI
---- ---------- --- ---
1 Classified 0 1
2 Mapped 0 0
3 Classified 7 0
4 Classified 0 0
Switch(qos)# tag-remarking map 2 7 1 7 1