System information

Publication date: Feb., 2012
Revision A1
- 160 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
show: ThecommandletsyoushowQoSinformation
Syntax:
show <port-list>
Parameter :
class-map: Show QoS class and DP level to DSCP mapping
dscp-map: Show DSCP to QoS class and DP level mapping
dscp-translation: Show DSCP ingress and egress translation
port-classify: Show QoS ingress port classification
port-dscp: Show port DSCP configuration
port-map: Show port classification (PCP, DEI) to (QoS class, DP level)
mapping table
<port-list>: available value is from switch physic port
density, format: 1,3-5
port-policer: Show port policer configuration
port-shaper: Show port shaper configuration
qce: Show QCL control list
<1-256>: QCE ID
qcl-status: Show QCL status
combined: Show the combined status
conflicts: Show all conflict status
static: Show the static user configured status
voice-vlan: Show the status by Voice VLAN
queue-shaper: Show port queue shaper configuration
<port-list>: available value is from switch physic port
density, format: 1,3-5
remarking-map: Show port tag remarking mapping table
<port-list>: available value is from switch physic port
density, format: 1,3-5
scheduler-mode: Show port scheduler mode configuration
scheduler-weight: Show port scheduler weight configuration
storm: Show storm control configuration
Switch(qos)# queue-shaper excess 1 7 enable
Switch(qos)# show queue-shaper 1
Port Queue Mode Rate Excess
---- ----- -------- --------- --------
1 0 Disabled 500 kbps Disabled
1 Disabled 500 kbps Disabled
2 Disabled 500 kbps Disabled
3 Disabled 500 kbps Disabled
4 Disabled 500 kbps Disabled
5 Disabled 500 kbps Disabled
6 Disabled 500 kbps Disabled
7 Disabled 500 kbps Enabled