System information

Publication date: Feb., 2012
Revision A1
- 16 -
Syntax:
tacacs+ <index> <enable/disable> <ip-hostname> <0-65535>
<Line>
Parameter :
<index> The TACACS+ authentication Server index. The available
value is from 1 to 5
<disable/enable> To enable or disable the TACACS+ authentication
service.
<ip-hostname> The TACACS+ authentication server IP address or
hostname.
<0-65535> The TACACS+ authentication server UDP port. If the port
is set to 0 (zero), then the default port (1813) is used.
<LINE> Secret shared with external accounting server. The Available
value is up to 29 characters long.
EXAMPLE:
NOTE: If you didn’t connect the
T
ACACS+ Server already
then the switch will show “Server disconnect”.
timeout: Thecommandletsyouconfigureserverresponse
timeout
Syntax:
timeout <3-3600>
Parameter :
<3-3600> The Timeout, which can be set to a number between 3 and
3600 seconds, is the maximum time to wait for a reply from a server.
EXAMPLE:
Switch(aaa)# timeout 360
Switch(aaa)#
Switch(aaa)# tacas+ 1 enable 192.168.2.22 0 tacacs
Server disconnect!