System information

Publication date: Feb., 2012
Revision A1
- 159 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
disable: Untagged frame only
enable: Tagged frame only
vid: Specify the VLAN ID filter for this QCE
any: No VLAN ID filter is specified. (VLAN ID filter status is
don't-care.)
<vlan-range>: A frame that hits this QCE matches this VLAN
range
EXAMPLE:
queue‐shaper: ThecommandletsyoudoQueueshaper
Syntax:
queue-shaper excess <port-list> <queue-list> disable/ enable
Parameter :
excess: Configure the port queue excess bandwidth mode
mode: Configure the port queue shaper mode
rate: Configure the port queue shaper rate
<port-list>: available value is from switch physic port density, format:
1,3-5
<queue-list>: Queue list, available value is from 0 to 7
disable: Disable use of excess bandwidth
enable: Enable use of excess bandwidth
EXAMPLE:
Switch(qos)# qce 13 23 25 etype
Switch(qos/qce-etype)# class 7
Switch(qos/qce-etype)# classified-dscp 63
Switch(qos/qce-etype)# dei 1
Switch(qos/qce-etype)# dmac unicast
Switch(qos/qce-etype)# dp 3
Switch(qos/qce-etype)# pcp 5
Switch(qos/qce-etype)# smac any
Switch(qos/qce-etype)# tag enable
Switch(qos/qce-etype)# vid 21-25
Switch(qos/qce-etype)# show
QCE ID : 13
Frame Type : Ethernet Port : 25,29
VLAN Parameters MAC Parameters
--------------- --------------
Tag : Tagged SMAC : Any
VID : 21-25 DMAC Type: Unicast
PCP : 5
DEI : 1
Ethernet Parameters Action Parameters
------------------- -----------------
Ether Type : Any Class : 7
DP : 3
DSCP : 63