System information

Publication date: Feb., 2012
Revision A1
- 145 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 35 PrivateVLANCommandsofCLI
Private VLAN
Ina privateVLAN, communication betweenports in thatprivateVLANis
notpermitted.AVLANcanbeconfiguredasaprivateVLAN.
Table 34: Private VLAN Commands
Command Function
delete
Delete private VLAN group
port-isolate
Configure port isolation
private-vlan
Configure private VLAN group
show
Show private VLAN information
delete: Thecommandletsyou deleteprivat eVL ANgroup

Syntax:
delete private-vlan <1- X>
Parameter :
private-vlan: private VLAN KEYWORD
<1- X>: Private VLAN ID. The allowed range for a Private VLAN ID is the
same as the switch port number range
EXAMPLE:
NOTE: In Private VLAN ID <1-X>, the number X is the max
value you can set based on the port count on the switch.
port‐isolate: Thecommandletsyouconfigureportisolation

Syntax:
port-isolate <port-list> disable/ enable
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
disable: Disable port isolation
enable: Enable port isolation
EXAMPLE:
Switch(pvlan)# delete private
-
v
lan 12