System information

Publication date: Feb., 2012
Revision A1
- 14 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
NOTE: If you didn’t connect the RADIUS Server already then
the switch will show “Server disconnect”.
radius:ThecommandletsyouconfiguretheRADIUSServer
detailparameter
Syntax:
radius <index> <enable/disable> <ip-hostname> <0-65535>
<Line> .
Parameter :
<index> The RADIUS accounting Server index. The available value is
from 1 to 5
<disable/enable> To enable or disable the RADIUS accounting
service.
<ip-hostname> The RADIUS accounting server IP address or
hostname.
<0-65535> The RADIUS accounting server UDP port. If the port is set
to 0 (zero), then the default port (1813) is used.
<LINE> Secret shared with external accounting server. The Available
value is up to 29 characters long.
EXAMPLE:
NOTE: If you didn’t connect the RADIUS Server already then
the switch will show “Server disconnect”.
Show: ThecommandletsyoudisplaytheRADIUSAAA
information.
Syntax:
Show <config>
Show <statistics> <1-5>
Parameter :
<config> To show AAA configuration
<statistics> To show RADIUS statistics
<1-5> The RADIUS Server Index
EXAMPLE:
Switch(aaa)# radius 1 enable 192.168.2.22 0 radius
Server disconnect!