System information

Publication date: Feb., 2012
Revision A1
- 138 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 33 PortsecurityCommandsofCLI
Portsecurity
This section shows you to to configure the Port Security settings of the
Switch. You can use the Port Security feature to restrict input to an
interfacebylimitingandidentifyingMACaddresses.
Table 32: Port security Commands
Command Function
action
Configure the action involved with exceeding the limit
aging
Configure the aging mode and period
limit
Configure the max. number of MAC addresses that can be
learned on the port
mode
Configure the global limit control mode
port-mode
Configure the port mode
reopen
Reopen one or more ports whose limit is exceeded and
shut down
show
Show port security status
action: Thecommandletsyoutoconfiguretheactioninvolved
withexceedingthelimit
Syntax:
action <port-list> both
/
none
/
shutdown
/
trap
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
both: Send a SNMP trap and shutdown the port
none: Do nothing
shutdown: Shutdown the port
trap: Send a SNMP trap
EXAMPLE: