System information

Publication date: Feb., 2012
Revision A1
- 134 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
disable: Disable port state operation
enable: Enable port state operation
EXAMPLE:
power‐saving: The command lets you configure power saving
operation
Syntax:
power-saving <port-list> actiphy
/
disable
/
dynamic
/
enable
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
actiphy: Enable ActiPHY power control
disable: Disable power saving
dynamic: Enable dynamic power control
enable: Enable power saving
EXAMPLE:
Switch(port)# port-state 1 disable
Switch(port)# show configuration
Port State Speed Duplex Flow Control Max. Frame Excessive Power
Description
-----------------------------------------------------------------------------
---
1 Disabled Auto - 1600 - -
david
-----------------------------------------------------------------------------
---
2 Enabled Auto - 10056 - -
-----------------------------------------------------------------------------
---
3 Enabled Auto - 10056 - -