System information

Publication date: Feb., 2012
Revision A1
- 133 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
max‐frame: The command lets you configure maximum receive
framesize
Syntax:
max-frame <port-list> <1518-10056>
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
<1518-10056>: Maximum receive frame size in bytes
EXAMPLE:
port‐state: Thecommandletsyouconfigureportstateoperation
Syntax:
port-state <port-list> disable
/
enable
Switch(port)# max-frame 1 1600
Switch(port)# show configuration
Port State Speed Duplex Flow Control Max. Frame Excessive Power
Description
-----------------------------------------------------------------------------
---
1 Enabled Auto - 1600 - -
david
-----------------------------------------------------------------------------
---
2 Enabled Auto - 10056 - -
-----------------------------------------------------------------------------
---
3 Enabled Auto - 10056 - -
Switch(port)# flow-control 21 enable
Switch(port)# show configuration
Port State Speed Duplex Flow Control Max. Frame Excessive Power
Description
-----------------------------------------------------------------------------
---
1 Enabled Auto - 10056 - -
david
-----------------------------------------------------------------------------
---
2 Enabled Auto - 10056 - -
-----------------------------------------------------------------------------
---
21 Enabled SFP_Auto_AMS Enabled 10056 Restart Disabled
-----------------------------------------------------------------------------
---
22 Enabled SFP_Auto_AMS Disabled 10056 Discard Disabled
-----------------------------------------------------------------------------
---
23 Enabled SFP_Auto_AMS Disabled 10056 Discard Disabled
-----------------------------------------------------------------------------