System information

Publication date: Feb., 2012
Revision A1
- 130 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 32 PortconfigurationCommandsofCLI
Port
This chapter describes how to view the current port configuration and
howtoconfigureportstonon‐defaultsettings,including
Linkup/Linkdown
Speed(Currentandconfigured)
FlowControl(CurrentRx,CurrentTxandConfigured)
MaximumFrameSize
ExcessiveCollisionMode
PowerControl.

Table 31: Port Commands
Command Function
clear
Clear port counter
description
Interface specific description
excessive-collision
Configure excessive collision operation
flow-control
Configure flow operation
max-frame
Configure maximum receive frame size
port-state
Configure port state operation
power-saving
Configure power saving operation
show
Show port information
speed-duplex
Configure speed duplex operation
clear: Thecommandletsyoutoclearportcounter
Syntax:
clear <port-list>
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
EXAMPLE: