System information

Publication date: Feb., 2012
Revision A1
- 127 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
reauthentication:
ThecommandletsyouconfiguretheNAS
re authenticationmode
Syntax:
reauthentication disable/ enable
Parameter :
disable: Disable NAS reauthentication
Enable: Enable NAS reauthentication
EXAMPLE:
reatart: ThecommandletsyourestartNASauthentication
process
Syntax:
restart <port-list> reauthenticate
/
reinitialize
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
reauthenticate: Schedules a reauthentication whenever the
quiet-period of the port runs out (EAPOL-based authentication). For
MAC-based authentication, reauthentication will be attempted
immediately
reinitialize: Forces a reinitialization of the clients on the port and
Switch(nas)# reauthentication enable
Switch(nas)# show config
Mode : Enabled
Reauthentication : Enabled
Reauthentication Period : 666
EAPOL Timeout : 8888
Age Period : 9999
Hold Time : 7777
RADIUS QoS : Enabled
RADIUS VLAN : Enabled
Guest VLAN : Enabled
Guest VLAN ID : 90
Maximum Reauthentication Count : 150
Allow Guest VLAN if EAPOL Frame Seen : Enabled
Switch(nas)# reauth-period 666
Switch(nas)# show config
Mode : Enabled
Reauthentication : Disabled
Reauthentication Period : 666
EAPOL Timeout : 8888
Age Period : 9999
Hold Time : 7777
RADIUS QoS : Enabled
RADIUS VLAN : Enabled
Guest VLAN : Enabled
Guest VLAN ID : 90
Maximum Reauthentication Count : 150
Allow Guest VLAN if EAPOL Frame Seen : Enabled