System information

Publication date: Feb., 2012
Revision A1
- 123 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
mode: ThecommandletsyouconfiguretheNASmode
Syntax:
mode disable/ enable
Parameter :
disable: Globally disable NAS operation mode
Enable: Globally enable NAS operation mode
EXAMPLE:
port‐guest‐vlan: ThecommandletsyouconfiguretheGuestVL ANmode
ofswitchports
Syntax:
port-guest-vlan <port-list> disable/ enable
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
disable: Disable Guest VLAN
Enable: Enable Guest VLAN
EXAMPLE:
Switch(nas)# mode enable
Switch(nas)# show config
Mode : Enabled
Reauthentication : Disabled
Reauthentication Period : 3600
EAPOL Timeout : 8888
Age Period : 9999
Hold Time : 7777
RADIUS QoS : Disabled
RADIUS VLAN : Disabled
Guest VLAN : Enabled
Guest VLAN ID : 90
Maximum Reauthentication Count : 150
Allow Guest VLAN if EAPOL Frame Seen : Enabled
Switch(nas)# hold-time 7777
Switch(nas)# show config
Mode : Disabled
Reauthentication : Disabled
Reauthentication Period : 3600
EAPOL Timeout : 8888
Age Period : 9999
Hold Time : 7777
RADIUS QoS : Disabled
RADIUS VLAN : Disabled
Guest VLAN : Enabled
Guest VLAN ID : 90
Maximum Reauthentication Count : 150
Allow Guest VLAN if EAPOL Frame Seen : Enabled