System information

Publication date: Feb., 2012
Revision A1
- 120 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Chapter 31 NASCommandsofCLI
NAS
ThesectiondescribestoconfiguretheNetworkAccessServerparameters
of the switch. The NAS server can be employed to connect users to a
variety of resources including Internet access, conference calls, printing
documentsonshare dprinters,orbysimplylog gingontotheInternet.
Table 30: NAS Commands
Command Function
agetime
Configure the time in seconds between check for activity
on successfully authenticated MAC addresses
clear
Clear NAS statistics
eapol-timeout
Configure the time between EAPOL retransmissions
guest-vlan
Configure the Guest VLAN mode
hold-time
Configure the time in seconds before a MAC-address that
failed authentication gets a new authentication chance
mode
Configure the NAS mode
port-guest-vlan
Configure the Guest VLAN mode of switch ports
port-radius-qos
Configure the RADIUS-assigned QoS mode of switch ports
port-radius-vlan
Configure the RADIUS-assigned VLAN mode of switch
p
orts
port-state
Configure the NAS port state
radius-qos
Configure the RADIUS-assigned QoS mode
radius-vlan
Configure the RADIUS-assigned VLAN mode
reauth-period
Configure the period between reauthentications
reauthentication
Configure the NAS reauthentication mode
restart
Restart NAS authentication process
show
Show NAS information
agetime: Thecommandletsyoutoconfigurethetimeinseconds
between check for activity on successfully
authenticatedMACaddresses.
Syntax:
agetime <10-1000000>
Parameter :
<10-1000000>: Time in seconds between checks for activity on a MAC
address that succeeded authentication
EXAMPLE: