System information

Publication date: Feb., 2012
Revision A1
- 118 -
mode: ThecommandletsyoutoconfigureMVRmode
Syntax:
mode disable/ enable <1-4094>
Parameter :
disable: Disable MV
R
enable: Enable multicast traffic forwarding on the Multicast VLAN
<1-4094>: Multicast VLAN ID, available is from 1 to 4094
EXAMPLE:
port‐mode: ThecommandletsyoutoconfigureMVRportmode
Syntax:
port-mode <port-list> disable/ enable
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
disable: Disable MVR on the specific port
enable: Enable MVR on the specific port
EXAMPLE:
port‐type: ThecommandletsyoutoconfigureMVRporttype
Syntax:
port-type <port-list> receiver
/
source
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
receiver: Define the port as receiver port
source: Define the port as source port
Switch(mvr)# port-mode 1 enable
Switch(mvr)# show config
MVR Mode : Disabled
Muticast VLAN ID : 1
Port Port Mode Port Type Immediate Leave
---- --------- --------- -----------------
1 Enabled Receive Enabled
2 Disabled Receive Disabled
3 Disabled Receive Disabled
4 Disabled Receive Disabled
Switch(mvr)# mode enable 1
Switch(mvr)# show config
MVR Mode : Enabled
Muticast VLAN ID : 1