System information
Publication date: Feb., 2012
Revision A1
- 115 -
Syntax:
relay-option disable/ enable
Parameter :
<vlan-list>: VLAN list, available value is from 1 to 4094 format: 1,3-5.
disable: Disable the per-VLAN MLD snooping
Enable: Enable the per-VLAN MLD snooping
EXAMPLE:
throtting: Thecommandletsyousetper‐portThrottling
Syntax:
throtting <port-list> <0-10>
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5.
<0-10>: Set port group limit number, range:0~10, 0:unlimited
EXAMPLE:
uri: Thecommandletsyousettheper‐VLANUnsolicited
ReportInterval
Syntax:
uri
<vlan-list> <0-31744>
Parameter :
<vlan-list>: VLAN list, available value is from 1 to 4094 format: 1,3-5.
witch(mld)# throttling 1 10
Switch(mld)# show config
MLD Snooping : Enabled
MLd Flooding Control : Disabled
MLd Proxy : Enabled
MLD SSM Range: ff3e::/96
Port Router Dynamic Router Fast Leave Group Throttling Number
---- -------- -------------- ---------- -----------------------
1 Disabled No Disabled 10
2 Disabled No Disabled Unlimited
3 Disabled No Disabled Unlimited
4 Disabled No Disabled Unlimited
Switch(mld)# state 1 enable
Switch(mld)# show config
MLD Snooping : Disabled
MLd Flooding Control : Enabled
MLd Proxy : Disabled
MLD SSM Range: ff3e::/96
Port Router Dynamic Router Fast Leave Group Throttling Number
---- -------- -------------- ---------- -----------------------
1 Disabled No Disabled Unlimited
2 Disabled No Disabled Unlimited
VID State Querier Compatibility RV QI QRI LLQI URI
---- -------- -------- ------------- --- ----- ----- ----- -----
1 Enabled Enabled IGMP-Auto 99 888 555 10 1