System information

Publication date: Feb., 2012
Revision A1
- 108 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
state
Enable/Disable the per-VLAN MLD Snooping
throttling
Set per-port Throttling
uri
Set the per-VLAN Unsolicited Report Interval
compatibility: ThecommandletsyousettheVersionsofMLD
OperatingonHostsandRouters.
Syntax:
compatibility < vlan-list > Forced-MLDv1
/
Forced-MLDv2
/
MLD-Auto
Parameter :
<vlan-list>: VLAN list, available value is from 1 to 4094 format: 1,3-5
Forced-MLDv1: Set MLDv1 of MLD operating on hosts and routers
Forced-MLDv2: Set MLDv2 of MLD operating on hosts and routers
MLD-Auto: Set auto mode of MLD operating on hosts and routers
EXAMPLE:
delete: Thecommandletsyoudeletecommands

Syntax:
delete <port-list> <ipv6-address>
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5
<ipv6-address>: Delete MLD filtering group.
EXAMPLE:
fast‐leave: Thecommandletsyousetper‐portFastLeave
Syntax:
fast-leave <port-list> disable
/
enable
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5
disable: Disable fast leave
enable: Enable fast leave
Switch(mld)# delete 1 fe80::202:b3ff:fe1e:8329
Switch(mld)# show config
MLD Snooping : Disabled
MLd Flooding Control : Enabled
MLd Proxy : Disabled
Switch(mld)# compatibility 1 forced-MLDv1