System information

Publication date: Feb., 2012
Revision A1
- 106 -
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
disable: The parameter means you to disable DHCP relay mode.
Enable: The parameter means you to enable DHCP snooping mode.
rx-only: Enable Rx mirroring
tx-only: Enable Tx mirroring
EXAMPLE:
show: Thecommandletsyoushowportmirroring
information.

Syntax:
show
Parameter :
<cr>
EXAMPLE:
Switch(mirror)# show
Analyzer Port: Disabled
Port Mode
---- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
Switch(mirror)# port-mode 2 enable
Switch(mirror)# port-mode 3 rx-only
Switch(mirror)# port-mode 4 tx-only
Switch(mirror)# port-mode 1 disable
Switch(mirror)# show
Analyzer Port: 1
Port Mode
---- --------
1 Disabled
2 Enabled
3 Rx-only
4 Tx-only