System information

Publication date: Feb., 2012
Revision A1
104
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
Parameter :
config: Show loop protection configuration
status: Show loop protection status
EXAMPLE:
shutdown: Thecommandletsyouconfigureloopprotection
shutdowntime.
Syntax:
shutdown <0-604800>
Parameter :
<0-604800>: Shutdown time interval. A value of zero disables
re-enabling the port
EXAMPLE:
Switch(loop-protect)# shutdown 200
Switch(loop-protect)# show config
Loop Protection : Disabled
Transmission Time : 3
Shutdown Time : 200
Switch(loop-protect)# show config
Loop Protection : Disabled
Transmission Time : 5
Shutdown Time : 180
Port Mode Action Transmit
---- -------- ---------------- --------
1 Enabled Shutdown Enabled
2 Enabled Shutdown Enabled
3 Enabled Shutdown Enabled
4 Enabled Shutdown Enabled
Switch(loop-protect)# show status
Port Action Transmit Loops Status Loop Time of Last Loop
---- ---------------- -------- -------- -------- ----
-------------------
1 Shutdown Enabled 0 Down - -
2 Shutdown Enabled 0 Down - -
3 Shutdown Enabled 0 Down - -
4 Shutdown Enabled 0 Down - -