System information

Publication date: Feb., 2012
Revision A1
103
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
port‐mode: Thecommandletsyouconfigureloopprot ectionport
mode.
Syntax:
port-mode <port-list> disable/ enable
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5
disable: Disable loop protection operation
enable: Enable loop protection operation
EXAMPLE:
port‐transmit: Thecommandletsyouconfigureloopprotectionport
transmitmode.
Syntax:
reinit <1-10>
Parameter :
<port-list> available value is from switch physic port density, format:
1,3-5
disable: Passively looking for looped PDU's
enable: Actively generating loop protection PDU's
EXAMPLE:
show: Thecommanddisplayloopprotectioninformation.
Syntax:
show config/ status
Switch(loop-protect)# port-transmit 1 disable
Switch(loop-protect)# show config
Loop Protection : Disabled
Transmission Time : 3
Shutdown Time : 180
Port Mode Action Transmit
---- -------- ---------------- --------
1 Disabled Shutdown Disabled
2 Enabled Shutdown Enabled
Switch(loop-protect)# port-mode 1 disable
Switch(loop-protect)# show config
Loop Protection : Disabled
Transmission Time : 3
Shutdown Time : 180
Port Mode Action Transmit
---- -------- ---------------- --------
1 Disabled Shutdown Enabled
2 Enabled Shutdown Enabled
3 Enabled Shutdown Enabled