System information

Publication date: Feb., 2012
Revision A1
102
CLIReferenceGuide
Copyright @ 2012 by Amer Networks
port‐action: Thecommandletsyouconfigureloopprotectionport
action.
Syntax:
port-action <port-list> both/ log/ shutdown
Parameter :
<port-list>: available value is from switch physic port density, format:
1,3-5
both: Shutdown the port and log event
log: Log the event only
shutdown: Shutdown the port
EXAMPLE:
Switch(loop-protect)# port-action 1 both
Switch(loop-protect)# show config
Loop Protection : Disabled
Transmission Time : 3
Shutdown Time : 180
Port Mode Action Transmit
---- -------- ---------------- --------
1 Enabled Shutdown and Log Enabled
2 Enabled Shutdown Enabled
Switch(loop-protect)# port-action 1 log
Switch(loop-protect)# show config
Loop Protection : Disabled
Transmission Time : 3
Shutdown Time : 180
Port Mode Action Transmit
---- -------- ---------------- --------
1 Enabled Log Only Enabled
2 Enabled Shutdown Enabled
Switch(loop-protect)# port-action 1 shutdown
Switch(loop-protect)# show config
Loop Protection : Disabled
Transmission Time : 3
Shutdown Time : 180
Port Mode Action Transmit
---- -------- ---------------- --------
1 Enabled Shutdown Enabled
2 Enabled Shutdown Enabled
Switch(loop-protect)# mode enable
Switch(loop-protect)# show config
Loop Protection : Enabled
Transmission Time : 3
Shutdown Time : 180
Port Mode Action Transmit
---- -------- ---------------- --------
1 Enabled Shutdown Enabled
2 Enabled Shutdown Enabled
3 Enabled Shutdown Enabled
4 Enabled Shutdown Enabled