Specifications

P10

Cleanfeed position 10

If position 10 has a Group module fitted P10 must be in

the disabled position.

If a Stereo module is fitted and it is to be used as a

Cleanfeed input P10 has to be enabled.

To enable link pins1–2.

Jumpers P11 and P12 are the Virtual Earth Disable options and will be set

depending on the operation and configuration of the console.

P11

Virtual Earth Disable options

Cleanfeed Jumpers. In an eight group console no jumpers are

fitted. In a four group console jumpers are fitted to disable

the unused Cleanfeed buses 3 and 4. To disable link pins5-6

and7-8.

If the Cleanfeed buses 3 and 4 are unused link pins1-2

and3-4.

When Group modules 5 to 8 are omitted the relevant virtual

earth buses are grounded. To disable the Groups 5 to 8 link

pins 9 – 10, 11 – 12, 13 – 14 and 15 – 16.

P12

When Group modules 5 to 8 are omitted the relevant virtual

earth buses are grounded. To disable the Groups 5 to 8 , link pins1-2,3-4,

5-6and7-8.