Specifications

Power Supplies & Cabling

WARNING:

THIS APPARATUS MUST BE EARTHED.

WARNING:

It is important that a console is never left connected to a defective PSU.

This may cause serious damage to the console.

WARNING:

The power cord must be disconnected before removing cover plates. The

power supply MUST be earthed. Under no circumstances should the mains

earth be disconnected from the power supply unit. Lethal voltages are present

on the printed circuit boards. Do not operate the unit with the top cover

removed.

Mains Lead Connections

FOR UK USER ONLY

All mains leads must have the green/yellow wire connected to mains earth. The

cores of the lead are colour coded:

Brown = LIVE

Blue = NEUTRAL

Green / Yellow = EARTH

As the colours of the wires in the mains lead may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows.

q The wire which is coloured Green and Yellow must be connected to

the terminal in the plug which is marked with the letter E or by the

Earth symbol.

q The wire which is coloured Blue must be connected to the terminal in

the plug which is marked with the letter N or coloured Black.

q The wire which is coloured Brown must be connected to the terminal

in the plug which is marked with the letter L or coloured Red.

Never remove any green/yellow earth connections. If you have earth loops in

your installation, they must never be ‘solved’ by removing safety earth

connections. The IEC connector is supplied, moulded to the mains lead and

should not be rewired.