User manual

7-20. Adjust the time clock of DVR automatically

Sometimes the DVR’s clock will become slower or faster than standard time. To adjust your DVR’s

time clock within a period, The “EzcClock” program allows you to auto adjust DVR’s time clock

with a Standard Time Server automatically via TCP/IP.

This chapter will show how to auto adjust the time clock of DVR with a Standard Time Server. – It

will synchronize the time clock of DVRs with Standard Time Server. Please refer chapter 7-20.

 Follow the steps below to auto adjust the DVR’s time clock.

Step 1. Click

Adjust System Clock- EzcClock and you should see below window

Fig.7-20.1.

Fig 7-20.1 Fig 7-20.2

Step 2. Entry the “ Set up EZClock “ icon (refer to Fig 7-20.2) to setup the entry the IP address

(or DNS) which one you want to check the time clock or use the default Standard Time

Server.

Step 3. Entry the period to adjust clock period from “ Sync. Every “ box.

Step 4. Enable “ Auto Run system “ and “ OK “ icon to complete the setting.