User manual

88
7-18. Using TV Out For Call Monitor Site
The CP-1600RD and Digi-3200Pro DVR board provide the multi TV Out ports and remote
controller that the user can use this function for call monitor site. The detail description as below:
Digi-3200Pro
Digi-3200Pro DVR board provides 2 VGA out and 5 TV out ports, the function of video out
description as below:
1. Split TV out#1: Display 1-16 camera split video out on TV. The customer can rotate split
video out (1, 4, 6, 8, 9, 10, 13, 16, 4x4, 9x9 split video) on TV and also can setup the “Pop Up
“ function when the camera is triggered automatically via the software. The customer also
can assign to display the video out (1, 4, 6, 8, 9, 10, 13, 16, 4x4, 9x9 split video) on TV via
Remote controller.
2. Split TV out#2: Display 17-32 camera split video out on TV. The customer can rotate split
video out (1, 4, 6, 8, 9, 10, 13, 16, 4x4, 9x9 split video) on TV and also can setup the “Pop Up
“ function when the camera is triggered automatically via the software. The customer also
can assign to display the video out (1, 4, 6, 8, 9, 10, 13, 16, 4x4, 9x9 split video) on TV via
Remote controller.
3. Pop up TV out#1: Pop up 1-16 camera signal video on TV when camera is triggered
automatically.
4. Pop up TV out#2: Pop up 17-32 camera signal video on TV when camera is triggered
automatically.
5. Rotate video out: Display signal video (1-32 camera) out on TV. The customer can rotate
the 1-32 camera on the TV and also can setup the “Pop Up “ function when the camera is
triggered automatically via the software. The customer also can assign to display the video
out on TV via Remote controller.
6. VGA port #1: Display live video, setup the parameters and playback video on this VGA
moitor.
7. VGA port #2: Display eMap and playback video on this VGA moitor.
Remote Controller: You can use a Remote controller to control the Rotate TV out and Split
TV out. The sensor cable can be extent to 200 meters to suitable for the actually application.