User manual

84
If you use the Internet to notify the remote site, the remote client PC need to have a fixed IP
address and connect to the Internet 24 hours a day.
Enable phone notification When motion detection is activated, the system will automatically
notify the listed phone numbers.
Select sound alarm: Selects which warning sound file will be played for notification by phone.
1. Enter the phone number into the Number/IP box.
2. Specify a Sound alarm for phone notify.
3. Click the Add button. Your information will be saved and shown in the number dialog box.
4. Repeat step 1 to 3 to add one more Phone call.
1. If you wish to make a Wave file for use with the “Phone notify” function, the file format
must be 8000Hz, 16-bit, Mono.
2. Each phone notification could be set its unique warning audio; phone connection will be
disconnected 1 minute later.
3. You must to use I-View specify Modem for phone notification.
4. If there are extension numbers in the telephone system, use one or several commas (,) to
separate the phone number and the extension number. The number of commas required
depends on the system, so test it in advance.
• Email notify When motion detection is activated, the system will automatically notify the listed
email address. To set the email notify function, use the following steps:
1. Enter the email address into the Mail to box which one you want to send the notify message.
2. Enter the mail server address into the SMTP box, which mail server you want to use for
sending the email.
3. Enter the email address of DVR into the Mail from box.
4. Enter the text into the Subject and Message box which information that you want to send to
the other people.
5. Enable Attachment image file function, that the email will attach the image of trigger.
6. Repeat step 1 to 5 to add another email notification.